SPECIFICATIONS

Brand Name: TZT

Electrified: No

High-concerned chemical: None

Model Number: ADI Pluto+

Origin: Mainland China

Attention!!! The mainboard is Pluto+ Rev.5, which is not compatible with the official Pluto firmware. It is recommended to flash the stable firmware recommended by the community.

* We adopt the libreSDR open-source project solution (it is an open-source project with a variety of mainboard designs, so the concept of genuine or pirated versions does not apply). Its key feature is that with specific firmware, the AD9363 chip can achieve the frequency range of the AD9361 chip, enabling the software to unlock the full frequency band from 70MHz to 6GHz.

*Unlike ordinary AD9363 boards, it delivers better performance at a more cost-effective price.

*If you need community firmware, our customer service team can provide recommendations for you. Feel free to contact the seller.(You can also refer to the firmware manual on the link.)

Statement:

* HamGeek ADI Pluto+ is intended for educational, scientific and hobby use only. Please consciously abide by the laws and regulations of your country or region!

Features:

* Using XC7z020-2CLG400I FPGA with 2-core Cortex A9

* The AD9363 RFSOC is turned on in AD9361 mode. The frequency range is 70MHz~6GHz, and the maximum sampling rate is 61.44MHz

* 1GB 32bit wide DDR3 1066MHz frequency

* With 32M QSPI storage, HamGeek ADI Pluto+ supports TF card expansion

* Supports automatic switching of QSPI boot and TF card boot (insert a TF card for TF card boot; remove the card for QSPI boot)

* On-board JTAG circuit and USB to serial port. Only one cable is required to supply power and debug

* Supports USB OTG interface, master and slave. All USB interfaces are TYPE-C interfaces. Supports OTG mode automatic recognition and opens the USB port to supply power

* VCTCXO is used. The initial frequency accuracy is 0.5PPM, and it supports PPS or 10MHz external disciplined oscillator

* Gigabit Ethernet interface

* The design current of all power rails in the digital part is 4A. The current is abundant. AD936x is powered by a ADP1755 high-performance LDO to improve RF performance

* HamGeek ADI Pluto+ is designed with 10 layers of PCB, impedance matching, and signal integrity

* The product adopts a CNC shell to strengthen heat dissipation and ensure strength (the shell version is optional)

* The software interface is libiio. It can be connected to libiio-enabled software such as for iioscope, SDRsharp, Matlab and GNURadio. In addition, you can contact customer service for other signal processing problems

Package Included

* 1 x Main unit

* 4 x Antennas

* 2 x USB cables

* 1 x Cable adapter

* 1 x Wrench

* 1 x Network cable

* Package weight: 0.6kg

Note:

* TF card is not included.

* The hardware version is not compatible with firmware version v0.39. Updating to the latest firmware is not recommended.