SPECIFICATIONS

Brand Name: NONE

Certification: ce

Commutation: Brush

Construction: Permanent Magnet

Efficiency: IE 2

High-concerned chemical: None

Origin: Mainland China

Output Power: 300W 500W

Protect Feature: Totally Enclosed

Torque: 2.24-60kg.cm

Usage: Home Appliance

12V 300W 3600rpm/24V 500W 7000rpm High-power CW CCW Dual

Bearing DC Permanent Magnet Motor

Only motor:motor*1pc

motor and bracket:motor*1pc and bracket*1pc

Note!

1. Front and rear dual bearings, without axial displacement, with very low sound; At maximum load of 24V 500W, the no-load speed is 7000 rpm (with an error of plus or minus 5%), and there are built-in fan blades.

2. The motor is a carbon brush motor, which can be replaced. You need to purchase a new carbon brush, then open the motor and solder it with a soldering iron;

3. It can be used for forward and reverse rotation and speed regulation, which can be achieved by changing the input direction of the DC transformer or adding forward and reverse switches; The speed control can be changed using a speed controller, but when the speed is lowered, the force will also decrease (the forward and reverse switches and speed controllers need to be purchased by oneself).

4. Due to its high power and starting current, it is recommended to use a 24V battery or a 24V high-power transformer. If the transformer power is insufficient, it may cause it to stop or fail to start when encountering a load (it is recommended to use a battery or a lithium battery without a protective board, or a switch mode power supply that is 1.8-2 times the motor power).