Wishcolor Handheld Tesla Coil Rechargeable Solid State Tesla Coil Manual & Automatic Modes with Yellow Shell

Read before Purchasing:

- Due to 3D printing technology, its shell may have some minor defects.

- It has a large noise (when the high-voltage arc breaks through the air. Please refer to thunder).

- Due to higher voltage and higher secondary voltage density, there may be a small amount of arc leakage around the top of the secondary coil, which is normal.

- Please read the above content carefully and make sure that you don't mind before purchasing. Thank you!

Specifications:

- Battery capacity: 200mAh

- Battery voltage: 11.1V

- Battery voltage (fully charged): 12.6V

- Charging limit voltage: 12.6V

- Arc length: 1-5cm/0.4-2" for automatic mode and 1-8cm/0.4-3.1" for manual mode

- Discharge times: 1200 times (conditions: discharge to 11V, manual mode and maximum pulse width)

- Weight: 276g/0.6lb (without charger)

Package Included:

- 1 x Tesla Coil

- 1 x Charger

- 1 x User Manual

Note:

- It should be fully charged before using. Keep it charged about two more hours when a green light is lit.

- When the voltage displayed by the screen is less than 11V, please charge the tesla coil to avoid the battery from being damaged.

- Disassembling is not allowed.

- After turning off the switch, its LED will continue to light up for about a minute, which is normal.

Attention:

- Minors should use it with a guardian.

- Because the arc has heat, it is forbidden to use this product around flammable and explosive substances.

- During charging, please not place it around combustibles to prevent accidents.

- Never use it around electronic products such as computers, TVs and mobile phones.

- Do not use this product on people or animals.

- If you have artificial organs implanted in your body or have a serious medical condition such as heart disease, you are not allowed to use or go near the tesla coil!

- Turn off the switch when it is not in use, and keep it out of the reach of children.