1. High brightness: Using imported LED chips, the brightness is several times higher than traditional halogen lamps.
2. Energy saving and environmental protection: The power consumption is much lower than traditional halogen lamps, and the lifespan is several times longer than traditional halogen lamps.
3. Plug and Play: compatible with the original vehicle circuit, no need to modify the circuit (some models require a decoder).

Voltage:12V
Waterproof:IP68
Lumen:12000LM
Color Temperature:6500K
Light Source: CSP 3570
Operating Life:50000 Hours
Operating Temperature:-40℃～+80℃
Material:Aviation Aluminum 6063
Heat Dissipation:Aviation Aluminum 6063+Cooling fan
Package Included:2*Led Headlight Bulbs, 1*Installation Manual

Explanation about Lamp Beads
H7, H11, H1, H3, 880, 9005/HB3, 9006/HB4, 9012, these belong to single lamps, with one lamp bead on each side of the lamp body, totaling two lamp beads. When in use, all the light beads are on.
H4/9003/HB2, 9004/HB1, 9007/HB5, 9008/H13, These belong to dual lamps, with 2 beads on each side of the lamp body, totaling 4 beads. For general car models, half of the light bulbs are on during high beam and the other half are on during low beam; Sometimes for special car models, the light bulbs can be fully illuminated when high beam.

Attention:

1. Make sure choose a right socket type before order. So you'd better check it on the web or just send inquiry with your car information, it's happy for us to check it for you.
2. It is suitable for most cars, not 100% error free. If it does not work after installation, please try 180° reverse the plug and reconnect. If it is flickering or has any error. it may be caused by the different current. Because our energy-efficient LED headlights require less current than halogen or xenon headlamps, then you need to install a pair of decoders to solve the problem.

Installation Precautions:

1. Put the vehicle into park or make sure it is securely in gear.
2. Make sure to have the ignition turned off and the keys removed.
3. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
4. Make sure not to touch the lamp bead with your fingers, so as not to stain or even damage it. Do not press the fan to avoid damage to the fan.
5. Pay attention to the positive and negative.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
6. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb,The wires of the lights should be facing down.
7.It is best to install a dust cover to prevent dust from affecting the headlights service life.