SPECIFICATIONS

Connection type: Thread Connection

High Temperature: 0~155℃

Medium: Air, Water,Oil, Gas

Name: Solenoid Valves

Operating Temp. Range: -50°C ~ 100°C

Operational Pressure Range: 0-1 MPa

Unit: Piece

Voltage: AC 110 V,AC 220 V,AC 230 V,Dc 12V,AC 240V,Dc 24V,220~240VAC, 110VAC, 380VAC,12VDC,24VDC,36VDC,50/60Hz

Working Temperature: 0~80℃

Working pressure: 0~1.0MPa

Working way: Internally operated

application: General

brand name: BLW PNEUMATIC

customized support: ODM,OEM

media: Water

model number: 2W400-40

place of origin: Zhejiang, China

port size: 1 1/2inch

power: Solenoid

structure: Control

temperature of media: High Temperature,Normal Temperature

warranty: 1 year

Size Information

Optional
●Seal Material:Viton- 10 ℃~130 ℃,EPDM- 10 ℃- 110 ℃ silicone rubber VMQ-20 ℃~110 ℃

● a steel coil (conventional type),plastic coil.
● Threaded connection: NPT thread, RC thread.
● Time timing controller (only with plastic coil with).

Proposal
●Please try to choose the design of the control scheme normally closed (NC), such as solenoid valves open a long time, shut down for a short time the selection of normally open (NO).
● fiuidcontains impurities, the filter should be installed before the valve (≥ 60 mesh strainer).● The direction of the body marks must be consistent with the medium flow.

Size Chart of Valve

Model

2W025-06

2W025-08

2W040-10

2W160-15

2W200-20

2W250-25

2W350-35

2W400-40

2W500-50

Work Medium

Air, Water,Oil,Gas

Diaphra-gm Type

2.5

0.23

1/4"

Under 20CST

0-1.0Mpa

0~155℃

Brass

Motion Pattern

Direct Drive

4

0.6

3/8"

Type

Normally Open NO(Power-on), Normally Closed NC(Power off)

16

4.8

1/2"

Flow Aperture

2.5mm

4mm

16mm

20mm

25mm

35mm

40mm

50mm

CV Valve

0.23

0.6

4.8

7.6

12

24

29

48

Bore Thread

1/8”

1/4“

3/8“

1/2”

3/4“

1”

1 1/4“

1 1/2”

2“

Fluid Viscosity

Under 20CST

40

29

1 1/2"

Working Pressure

0-7kgf/cm²

Oil:0-5kgf/cm²; Gas:0-7kgf/cm²; Water:0-5kgf/cm²; Air:0-7kgf/cm²;

48

2"

Max.Pressure

10kgf/cm²

10.5kgf/cm²

Temperature Range

Normal 0-80℃,  High Temperature 0-155℃ Customized

Voltage Range

±10%

Material of Body

Brass,Zinc Alloy, Stainless

Material of Seal

NBR,EPDM,VITON,

Detailed Images

Product Feature

1.compact Size,Easy to Assemble and Disassemble. 2.2W-200-25 Solenoid valves Has High Precision Pilot Head,Up to 5 Times/second Response Speed,Suitable fora Wide Range Of,Responsive, Smooth Work,High-speed Use Without Jam. 3.Only 25 Psi can Start the Pneumatic valve,Which is Easy to Operate,Easy to Install and Easy to Remove. 4.This Valve's Body is Made of Solid Brass (very Corrosion Resistant Material).Safe and Reliable to Use 5.The InnerHole is Machined by a Special Process, with Low Frictional Resistance,Low Starting AirPressure and Long Service Life 6.Please Pay Attention to the Direction of Gas Flow and the Correct connection when Installing.Pay Attention to Dustproof. 7.AirSolenoid valve Has single control Solenoid valve Have Internal Pilot structure,sliding column Structure,Good sealing and Responsive 8.Manual Operation,Smooth Operation,Accurate and Reliable Positioning.High Precision Stem Fit Degree is High Air Tightness 9.Widely,Informs the to Controlthe Flow ofVarious Types ofFluids to the As Air,Water,Mud,Liquid Metas,Etc.

Stainless steel shaft

304s shaft has better performance in acid and alkalinity working environment, more longer service time than copper shaft

Complete size specification

The body is made of good quality brass which minimize tiredness during long-term work.

Pure copper coil

Excellent electrical conductivity. Good heat dissipation performance

NBR seal

Better wear resistance and heat resistance, so that the air tightness is better

Certifications

Packing&Shipping

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.