Mini for Tesla Coil DIY Welding Kits Arc Experiment Wireless Transmission High Temperature High Pressure Plasma DC15-24V 15W 2A
Features:
1. Arc Generation Function: The rear wires of this mini for tesla coil diy welding kits produce mesmerizing arcs when powered on, adding an aesthetic touch to your setup.
2. Remote Lighting Function: For Tesla coil powered on, mini music for tesla coil plasma speaker has the ability to remotely illuminate fluorescent lights, creating a captivating visual display.
3. Ignition Capability: The high-temperature arc generated by the diy music loudspeaker board's head can be used to ignite paper or light cigarettes, offering a unique and practical feature.
4. Music Playback Function: This diy music loudspeaker board incorporates a novel concept of using plasma-induced air vibrations as a speaker, allowing you to play music from your phone or computer. Please note that the sound output is relatively low, making it suitable for enjoying the magical arcs while listening to music in a peaceful environment.
5. Satisfaction Guarantee: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly. 



Product Description:
for Tesla Coil
(for Tesla Coil) is a transformer that operates on the principle of resonance. It was developed by the Serbian-American scientist Nikola for Tesla in 1891. It is mainly used to produce ultra-high voltage but low current and high frequency AC power. A for Tesla coil consists of two (sometimes three) coupled resonant circuits. For Tesla coil is difficult to define, and for Tesla experimented with a large number of various coil configurations. For Tesla used these coils to conduct innovative experiments such as electrical lighting, fluorescence spectroscopy, X-rays, high-frequency alternating current phenomena, electrotherapy and wireless power transmission, emitting and receiving radio electrical signals.

Specification:
Origin: Mainland China
Type: Module
Condition: New
Working parameters>
Power input: DC 12-24V current 2A
Audio input: mobile phone, MP3, computer audio, etc. (3.5 headphone jack)
Size: 75*39*67MM

Note:
The heat dissipation is relatively large when working, so the heat sink is relatively hot. When using it, be careful not to touch the heat sink with your hands.
1. This kit is simple to make and has a high success rate. Common problems are that the primary coil is wound in the opposite direction, the LED is installed in the opposite direction, and the arc or sound is small because the voltage is low. Please pay attention to whether the output power of the voltage is sufficient.
2. Do not touch the heat sink after being powered on for a long time. The temperature is very high, especially when using 24V high voltage. There is a fan interface reserved. If necessary, please add a cooling fan to dissipate heat.
3. It is recommended that the body or other objects should not be close to the coil when for Tesla coil is working, that is, there should be no other objects within half a meter of the coil, because other objects, as good conductors, will allow the coil to form a good usage and absorb the energy of the coil, making for Tesla When the coil is pulled, the demonstration effect becomes worse or the demonstration cannot be performed!
4. Do not put mobile phones, MP3 players and other electronic devices close to the coil, otherwise the high-frequency magnetic field generated by the coil will interfere, causing mobile phones, MP3 players and other devices to malfunction or even be damaged!
5. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
6. Please allow 1-2cm measuring deviation due to manual measurement.