PDG ibma
3 Axis Water-Cooled Engraving Machine for DIY, Wood, Plastic-CNC Router Engraving Drilling and Milling Machine 1.5 kw LY FS3040
3 Axis Water-Cooled Engraving Machine for DIY, Wood, Plastic-CNC Router Engraving Drilling and Milling Machine 1.5 kw LY FS3040
Couldn't load pickup availability
SPECIFICATIONS
No. of Spindles: Single
Spindle Motor Power (kw): 1.5
brand name: LY
cnc or not: CNC
core components: Motor
dimension(l*w*h): 300*400*100
key selling points: Easy To Operate
machine type: CNC Router
machinery test report: Provided
number of axes: 3
place of origin: Guangdong, China
positioning accuracy (mm): 0.02
range of spindle speed(r.p.m): 0 - 24000
repeatability (x/y/z) (mm): 0.02
travel (x axis)(mm): 300
travel (y axis)(mm): 400
video outgoing-inspection: Provided
voltage: 220
warranty: 1 Year
weight (kg): 31
LYBGACNC LYFS2030 3040 3060 4060 3/4/5axis Engraving machine CNC Router Engraving Drilling and Milling Machine
Introduction
This is a very good era,in the past we only can see the CNC machine equipment in factory, but now, the CNC equipment has been into our lives;
Whether you are a small or medium enterprises managers, project engineers, CNC enthusiast or artists, related students, there are something on this machine will attract you;
It can help you processing a lot of parts, whether you are modeling or home decoration or creative DIY.
It can help you intuitively to learn CNC knowledge. And testing learning outcomes in real time.
Â
Model and Technical Parameters
|
Brand |
LYBGACNC |
|||
|
Model |
LYFS2030 |
LYFS3040 |
LYFS3060 |
LYFS4060 |
|
Working stroke (XYZ) mm |
300*400*100 |
300*600*100 |
400*600*100 |
|
|
Machine size cm |
50*40*50 |
62*52*50 |
80*52*50 |
80*60*50 |
|
Weigh |
27 |
31 |
35 |
43 |
|
≤120mm |
||||
|
12~15mm aluminum plate |
||||
|
Table material: |
Aluminum alloy T table + Water tank |
|||
|
Rail type |
X Y 1605 ball screw; Z 1204 ball screw, Square line rail track, three-axis is 20 mm square wire track, |
|||
|
Spindle motor |
1500W/2200WVFD Water-cooled spindle ,0-24000r/min, |
|||
|
Collet type |
ER11,1/8"(3.175mm) Collet |
|||
|
Stepper motor and drive |
||||
|
Repeat positioning Accuracy |
0.02mm |
|||
|
Communication interface |
USB Port |
|||
|
System requirements |
Win-XP / Win 7 Win 8 Win10 |
|||
|
Software Co patability |
Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam) |
|||
|
Command code |
G code/.nc/.ncc/.tab/.txt |
|||
|
4th Axis (Optional) Description: |
Center height: H = 51mm Maximum turning diameter: ≤ 81mm Deceleration ratio: 4:1 Stepper motor: 57HS56 |
|||
|
5th Axis (Optional) Description: |
The fourth axis gear ratio: 4: 1 (57 two phase 3A stepper motor 1.2N) The fifth axis reduction ratio: 5: 1 (57 two phase 3A stepper motor 1.2N) Four jaw chuck 60MM The clamping: Positive direction:40mm; In the opposite direction:70mm Fourth axis Center height: 55MM The fifth axis higher than the 4th axis 44 mm Bottom fixed hole distance: 150mm x 85mm |
|||
Â
Warranty
More Precise Stepping Motor
Simple operation and installation
1 year machine part and 6 months electrical parts,stepping motor,spindle Free Warranty
Â
Precautions for use
1.Beware of potential safety hazards of electricity use. Please ground the rack and take necessary personal protection measures. It should be placed at a place where children can't touch everyday;
2. The machine is divided into 110 and 220V. Please leave a message when ordering;
3. When the new machine is assembled, the main shaft must be connected to the main shaft output of the control box;
4.After the machine works for a period of time, if the main shaft does not rotate, please check whether the two carbon brushes on the motor are worn;
Â
